IKEA VAPPEBY Manual página 12

Other settings:
Unpair Bluetooth devices
Set up a stereo pair
Enable/Disable the auto-off
function
Factory reset
12
Press and hold the Bluetooth pairing button (4)
for ≥1.5 s. The speaker will release the Bluetooth
connection to the phone and start searching for
another device to pair with. The LED will change
from steady light to flashing.
You can pair two identical VAPPEBY 20 gen3
speakers to create a stereo experience. In this
configuration, one speaker serves as the left channel
and the other serves as the right channel.
1. Factory reset both speakers
2. Both speakers automatically enter Bluetooth
pairing mode (LED quick flash).
3. Press twice on the Bluetooth button (4) on one
of the speakers (master) to initiate stereo pairing
(LED slow flash).
4. Successful pairing is confirmed by a system sound.
5. Pair the master speaker to your source device.
To disconnect a stereo pair, factory reset both
speakers.
Move the switch (2) to position "20" to enable auto-
off. The speaker will turn off automatically after 20
minutes if no music is played. Move the switch (2) to
position "∞" to disable the auto-off function.
Press and hold the volume knob (5) for 5 seconds. A
confirmation sound will be played.