J.P. Bowlin Sartorius Cubis II Manual página 758

Operating Design
Level 1 Level 2
Device Draft shield*
settings
Ionizer*
Start-up behavior
Device cleaning*
Display properties
* If a related QAPP is activated: The menu is shown.
40 Operating Instructions Cubis
Level 3
Left/right palm key
Automatic mode
Sensor mode
Left proximity sensor
Right proximity sensor
Opening angle for left
key
Opening angle for right
key
Activation ionizer
Intensity
Start-up duration
Initial zeroing/taring
Automatic login
User identification service
Automatic start of task
Display brightness
On | off switch
Color scheme*
| MCA Models
®
Description
Set the function of the left and right palm
key.
If enabled: Closes the draft shield, carries
out the function, and opens the draft shield
again.
Activates or deactivates the proximity
sensors.
Sets the sensitivity of the left proximity
sensor.
Sets the sensitivity of the right proximity
sensor.
Set the opening angle for the left palm key.
Set the opening angle for the right palm
key.
Define the switch-on behavior for the
ionizer.
Define the intensity of the ionization
process.
Define the duration of the ionization process
in seconds.
Activate or deactivate automatic zeroing
and taring when starting the device.
Activate or deactivate automatic log-in of
the last user when starting the device.
Activates a user identification for the
service.
Select or deactivate automatic start of a
task when staring the device. All tasks that
are configured on the device can be
selected.
Functions to support device cleaning
Define the brightness of the operating
display.
Select the "Energy saving" or "Switch off"
function.
Define the settings for the operating display
color scheme.