Mestra R-050051 Guia página 7

 After removing the wax, apply a ¼ turn to the
flame nozzle to return to the initial position,
and connect the burner to the gas mains as de-
scribed above, in reverse order.
PRECAUTIONS
 Before connecting the burner, ensure that the gas
supply is correct (butane, natural gas).
 Only connect the appliance to a gas network that
has been subjected to regulatory inspections by an
accredited technician.
 Make sure that the connection between burner and
gas supply is solid and secure.
 Never allow children or unqualified staff to use the
burner.
 Make sure the flame has a bright blue base and a
strong yellow tip. Reddish colors, and black smo-
ke in particular, indicate poor combustion. Always
avoid this situation using the airflow valve.
 After using the burner, always close the shutoff
cock and gas mains stopcock.
 Place the burner on a flat surface with no vibra-
tions at a well ventilated area, away from flamma-
ble materials.
 Never leave the burner operating unattended.
 If you smell gas, close the mains stopcock imme-
diately and inform a licensed technician.
 Make sure the supply hose is always in perfect
condition as required by regulations, as it could
cause an explosion or Accidental poisonings.
Check the expiration date and, if the rubber is ex-
pired, is deformed or worn, it is imperative to
switch to another of the same type and length in
good condition.
ACCESSORIES
 050050-01 Wax container:
Burner series R-050053/54 is supplyed with a wax
container.
Burner series R-050051/52, is identical to the
previous one, but without this accessory.
In order to use the container, place it upon the flame
nozzle.
 050051-04 Connection dowel:
Components:
Assembly:
TECHNICAL CHARACTERISTICS
050051/050053
Gas: G30 (Butane) /
G31 (Propane)
Cathegory:
Pressure: 28-30 / 37 mbar
Injector: 0.3 mm
Consumpton:
Height:
Lenght:
Width:
050052/050054
G20 (Natural)
I I
2H 3+
20 mbar
0.5 mm
Hi: 0.3 kW
72 mm
175 mm
94 mm
7