Idiomas disponibles
Idiomas disponibles
ACCESORIOS
050050-01 Cazoleta recipiente para recoger cera:
La serie de mecheros R-050053/54 se suministra
junto con un recipiente para la cera.
La serie R-050051/52, es idéntica a la anterior, pero
carece de este accesorio.
Para utilizar la cazoleta, encájela sobre la boquilla de
llama.
050051-04 Espiga de conexión:
Componentes:
Montaje:
CARACTERÍSTICAS TÉCNICAS
050051/050053
Gas:
G30 (Butano) /
G31 (Propano)
Categoría:
I
2H
Presión:
28-30 / 37 mbar
Inyector:
0.3 mm
Consumo:
Altura:
Longitud:
Anchura:
050052/050054
G20 (Natural)
I
3+
20 mbar
0.5 mm
Hi: 0.3 kW
72 mm
175 mm
94 mm
EN
INSTALLATION
1. Carefully unpack the gas burner. You will find a
label on the rear side of the burner base describ-
ing the type of fuel to be used. Make sure that
the burner fuel coincides with your gas sup-
ply.
R-050051 Butane/propane gas
R-050052 Natural gas
R-050053 Butane/propane gas + wax container
R-050054 Natural gas + wax container
2. Place the burner on a flat surface with no vibra-
tions at a well-ventilated area, away from flam-
mable materials.
3. Check your gas supply conditions. Make sure
that all the necessary inspections have been per-
formed by licensed technicians.
4. To connect the burner to the gas supply, screw a
normalized hose to the burner fitting (D). Make
sure that the nut is correctly tightened.
In case you are using a conection dowel (look at
the "Accessories" section), insert the dowel into
the rubber tube and thighten it with a clamp.
Then, screw the dosel to the burner fitting (D).
5
