VONROC MS507AC Traducción Del Manual Original página 7

Ocultar thumbs Ver también para MS507AC:
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 62
1. SAFETY INSTRUCTIONS
Read the enclosed safety warnings, the additional
safety warnings and the instructions. Failure to follow
the safety warnings and the instructions may result in
electric shock, fire and/or serious injury. Save the safe-
ty warnings and the instructions for future reference.
The following symbols are used in the user
manual or on the product:
Read the user manual.
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-obser-
vance of the instructions in this manual.
Risk of electric shock.
Keep bystanders away.
Wear a dust protection.
Wear ear and eye protection.
Attention: Laser radiation. Do not stare into
the beam Class 2 laser.
Keep hands away from the cutting area
while the power tool is running. Contact
with the saw blade can lead to injuries.
Danger area! Keep hands, fingers or arms
away from this area.
Transport the machine only when the
machine is in inward transport position.
Class II machine - Double insulation -
You don't need any earthed plug.
The product is in accordance with the
applicable safety standards in the European
directives.
The adjustable fence must be
1
2
3
pulled outward when sawing
mitre/bevel angles.
WWW.VONROC.COM
Take note of the dimensions of
Ømax.
the saw blade. The hole
255mm
diameter must fit the tool
Ø30mm
spindle without play. If it is
necessary to use reducers,
ensure that the dimensions of
the reducer are suitable for
the base blade thickness and
the saw blade hole diameter,
as well as the tool spindle
diameter. Wherever possible,
use the reducers provided
with the saw blade. The saw
blade diameter must match
the information specified on
the symbol.
Dual speed mitre saw. Select
'I' for a speed of 3200
rotations per minute or select
'II' for 4500 rotations per
minute. Generally speaking,
use the lower speed 'I' for
metal. Use the increased
speed 'II' for wood.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or batte-
ry-operated (cordless) power tool.
1) Work area safety
a) Keep the work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive atmos­
pheres, such as in the presence of flammable
liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while ope­
rating a power tool. Distractions can cause you
to lose control.
EN
7
loading