Idiomas disponibles
Idiomas disponibles
• Identify the quick release mechanism and practice using it before
you start using the machine. Its correct use may prevent serious
injury in the case of an emergency. Never wear additional clothing
over the harness or otherwise restrict access to the quick release
mechanism.
• Before starting the tool, make sure the saw cha巾is not contacting
any object.
• An incorrectly tensioned chain can jump off the guide bar and could
result in serious injury. Check before each use and frequently,
especially a new chain.
• If there're some problems with moving parts, always stop the
machine, disconnect from the mains, make sure all moving parts
have come to a stop before:
- cleaning or clearing a blockage
- leaving the product unattended
- installing or removing attachments
- checking, maintaining or working on the machine
• Kickback may occur when the nose or tip of the guide bar touches
an object, or when wood closes in and pinches the saw chain in the
cut.
Tip contact in some cases may cause a sudden reverse reaction,
kicking the guide bar up and back towards the operator. Pinching the
saw chain along the top of the guide bar may push the guide bar
rapidly back towards the operator. Either of these reactions may
cause you to lose control of the machine which could result in serious
personal danger.These can be avoided by taking the following
appropriate precautions as below.
- With a basic understanding of kickback, you can reduce or eliminate
the element of surprise. Sudden surprise contributes to accidents.
09
