Idiomas disponibles
Idiomas disponibles
PRUNER SAFETY WARNINGS
• Never use the pruner when there is a possibility of thunderstorm
or lightning. Store the pruner and the power cables safely indoors.
• Ensure all guards, handles are properly fitted and are in good
condition.
• Do not start using the product until you have a clear work area,
secure footing, and a planned retreat path away from the falling
branches or limbs.
• Beware of the emission of lubricant mist and sawdust. Wear mask
or respirator if required.
• Electrical power should be supplied via a residual current device
(RCD) with a tripping current of not more than 30 mA.
• If the power cable becomes damaged, do not use the machine
and have it repaired immediately by a qualified technician.
• Always hold the pruner with both hands when operating it. Use
one hand to firmly grasp the front hand grip. Use the other hand to
grasp the rear handle and operate the trigger release and on/off
trigger.
• Hold the power tool by insulated gripping surfaces only, because
the saw chain may contact hidden wiring. Saw chains contacting a
"live" wire may make exposed metal parts of the power tool "live"
and could give the operator an electric shock.
• Do not modify your tool in any way or use it to power any
attachments or devices not recommended by the manufacturer for
your pruner.
• Your pruner comes with a harness. You must use it whilst
operating the pruner. It will assist you to control the drop of the
pruner after the cut is completed. It will also help support the
weight of the machine during use and whilst moving between
pruning positions.
08
