Idiomas disponibles
Idiomas disponibles
Picture 2
First, mount the sliding door glass in the upper frame in
the direction shown in picture 2, so that the handle is on
the right-hand side.
Next, place two of the plastic stops included in the
accessory bag on the left-hand end rails, with the tabs
facing the inside of the profile.
Slide the lower channel glass to the left (Fig. 3) and place 2
more stops on the right side, so that the tabs of the stop
face the inside of the channel.
Repeat the same process to install the upper pane.
NOTE: The glass stoppers will be placed in the profile
channel on the front side of the cooler in the flat cooler and
on the profile channel on the rear side of the cooler in the
inclined cooler.
14
Picture 3
V.1
