Idiomas disponibles
Idiomas disponibles
Installation instructions
B
REVERSING THE DOOR SWING
(CONT.)
[] REMOVE
THE FRESH FOOD DOOR
3.1 Tape the door shut with masking tape.
3.2 Using a 5/16" hex-head
socket screwdriver
and
a 5/16" open-end
wrench, remove the two
screws holding
the center binge (and the shim
glued to it) to the cabinet. I,ift the center hinge
to flee its pin flom the socket in the top of the
door, and set hinge and screws aside. Be careful
not to lose the center hinge spacer and washer.
3.3 Remove
dm tape
and
flit die door
away flom
file
cabinet.
I,ift file door
flom
file pin in the
bottom
hinge
bracket.
(If the
plastic
washer
socks
to the
door
bottom,
put it back
on file hinge.)
3.4 Set tile door outside-up
on a non-scratching
surface.
REMOVE THE FRESH FOOD DOOR (CONT.)
3.5 Transfer
tlle two screws flom tlle opposite
side of tile
cabinet
to tile screw holes vacated
by tile center
hinge removal.
3.6 Transfer
tile washer
(if your model
has one) to tile
opposite
side.
3.7 _ke one of file screws removed in stop 2 and start
it in the oummlost screw hole on the opposite side.
Do not drive it all the way down-ileave
enough space
under the screw head for thickness of shim and
bracket.
REVERSING
THE HARDWARE
4.1 Moxe
the bottom
hinge
bracket
(and
shim
glued
to it)
and
plastic
washer
fiom
the
right
side
to
the
left
side.
Plastic
--'_ I.,
__1 Washer
Switch the
hinge
pinto
the
®[¢"I
_1_1_
opposite sideof thebracket.
II_--__:_
Hinge
Bracket
12
