Idiomas disponibles
Idiomas disponibles
+
For the breathing mode and static colour mode you can manually
change colour by holding the + button and press right on the
direction pad (13).
+
Responsive LED mode: hold the - button and press left on the
direction pad (13). This mode requires the right and left sticks'
LEDs to be enabled. The mode follows the controller's current LED
mode.
The controller will not remember the last used LED mode.
Adjust turbo speed
Turbo can be set to 3 speeds (automatic Presses Per Second = pps):
5pps, 12pps (default) and 20 pps.
Increase speed: Press and hold the turbo button (3) + right stick
(10) upwards to increase speed.
Decrease speed: Press and hold the turbo button (3) + right stick
(10) downwards for to decrease speed.
Adjust vibration ("Switch")
Vibration can be set to 4 intensities: 0%, 30%, 70% (default), 100%.
Increase vibration: Press and hold the turbo button (3) + left
stick (1) upwards to increase vibration.
Decrease vibration: Press and hold the turbo button (3) + left
stick (1) downwards to decrease vibration.
Macro buttons
The macro buttons MR(22) and ML (19) are underneath the
controller. Default macros are A=ML, B=MR. These buttons can be
set to macros:
A/B/X/Y/L/R/ZL/ZR/up/down/left/right.
To set a macro:
1. Press and hold turbo + ML or MR for about 2 seconds. LED 2 and
LED 3 confirms by staying lit.
2. Press the button combination you want to record to a macro.
It will remember which buttons and which order, and time interval
between the presses.
3. Press ML or MR (depends on which you pressed in step 1) to save
the macro. The LED changes back to previous mode.
When the controller re-connects it will remember the last saved
macro settings.
To clear the macro settings press and hold turbo + ML or MR. Then
press ML or MR again to clear and save the setting.
Switch console: Test macro settings -> Press the "Home"- button
from main screen -> System settings -> Controllers and sensors ->
Test Input Devices -> Test Controller Buttons.
Reset and power off
Press and hold the "home" button for about 10 seconds to power
off.
Press and hold - button + turbo button for about 6 seconds to make
a factory reset.
Factory reset sets the macro buttons, vibration and turbo speed
to default.
Cleaning
Clean with a soft dry cloth.
App
This game controller is compatible with the 3rd party KeyLinker
app. With the app you can modify the buttons, change the
vibration, and more.
The app is available both on Google play and App store.
Disclaimer
DistIt services AB and Aurdel is not associated with the
developers or development of the KeyLinker app, or App store, or
Google play.
Warranty
Please, see www.deltaco.eu for warranty information.
Suppor
t
More product information can be found at www.deltaco.eu.
Contact us by e-mail: [email protected]
13
