Makita ML120 Guía Rápida página 4

OPERATING INSTRUCTIONS
Chargin9
Charge the battery cartridge with the Makita charger before use, To remove the baftery cartridge, withdraw it
from the flashlight while pressing the buttons on beth sides of the cartridge. After charging, insert the battery
cartridge into the flashlight all the way until it locks in place with a riffle click. (Fig. 1)
NOTE:
Battery cartridges 1200, 1201, 1202, 1202A can be used on MLt 20 if you install the set plate. Install the sel
plate on ML120 with the screw provided as shown In Fig. 2,
The following tables indicate the operating time on a single charge.
ML120
Battery Battery Battery Battery I Battery I
cartridge 120011220 1201 1202/1202N1222 1233
Operating time Approx. t00 rain. Approx. 130 rain. Approx. 150 rain. Approx. 170 rain.
(Note)
If you use a power checkingbattery on Model ML120, the power checking batterywill not indicate the remaining
battery capacity properly.
ML140
Battery
cartridge
Operating time
Battery
1422
Approx. 150 rain,
Battery
1433
Approx. 170 rain,
I
Head angle (Fig. 3)
The head angle can be adjusted in four stages. Adjust as desired.
Replacing bulb (Fig. 4 & 5)
CAUT}ON:
The bulb is very hot immediately after operation. Wait until the bulb cools off before attempting to replace it.
First, turn the ring counterclockwiseand remove the reflector.Then replace the bulb.
MAINTENANCE
To maintain product safety and reliability, repairs, maintenance or adjustment should be carriedout by Makita
Authorized Service Center.