Idiomas disponibles
Idiomas disponibles
OPERATION
Once the water bottle is connected to the water cooler, the unit is ready for use. Turn the switch
on the back of the unit to the ON position. First, the unit will pump the water from the water
bottle to the cooling and heating reservoirs.
Next, the unit's compressor and heater will begin to operate. The first time you use the water
cooler, you will have to wait at least half an hour for hot and cold water.
The water cooler has 3 indicator lights on the front panel:
1. When the HEAT indicator light is on, the water cooler is heating water inside
by HEATING the hot water tank.
2. When the COOL indicator light is on, the unit is in the process of cooling
the water inside the cooling tank.
3. When the EMPTY indicator light on the front panel is ON, there is no water
left in the water bottle. Replace the water bottle and close the door to restart
the unit. The water cooler will resume operation and the indicator light will go
out.
USE OF THE WATER COOLER
To dispense HOT water, slide the hot water handle to the left side, then press the
button all the way down.
To dispense NORMAL water, press the normal water button all the way down. To
dispense COLD water, press the cold-water button all the way down.
