Craftsman 919.167342 Manual De Instrucciones página 20

Before you store the air compressor,
make sure you do the following:
1+ Review the "Maintenance"
section on the preceding
pages and perform scheduled
maintenance as necessary.
2. Set the On/Auto/Off lever to
"Off"+
3+ Turn the regulator
counterclockwise and set the
outlet pressure to zero.
4. Remove the air toot or accessory.
5+ Pull ring on safety valve allowing
air to bleed from the tank until
tank pressure is approx+mately
20 psi. Release safety valve ring.
6. Drain water from air tank by
opening drain valve on bottom of
tank.
not drained, water will corrode and
weaken the air tank causing a risk
of air tank rupture,
7+ After the water has been drained,
close the drain or drain valve+
NOTE: If drain valve is plugged,
release all a+r pressure+ The valve
can then be removed, cleaned, then
reinstalled+
8+ To protect the electrical cord
from damage wind electrical cord
loosely around the compressor
handle+
Store the air compressor in a clean
and dry location+
A09708 20-ENG