Idiomas disponibles
Idiomas disponibles
3.2.
Preparing for use
APPLIANCE LOCATION
The temperature of environment must not be higher than 40°C and the relative humidity should be less
than 85%. Ensure good ventilation in the room in which the device is being used. There should be at least
10 cm distance between each side of the device and the wall or other objects. The device should always be
used when positioned on an even, stable, clean, fireproof and dry surface, and be out of the reach of
children and persons with limited mental and sensory functions. Position the device such that you always
have access to the power plug. The power cord connected to the appliance must be properly grounded
and correspond to the technical details on the product label.
3.3.
Device use
1. Connect the device to the power supply.
2. Turn the power switch [2] to "I" (ON) – the appliance turns on. Once turned on, the display reads "InP"
with the temperature control range for a few seconds.
3. Set the operating temperature:
(a) Press the SET button [6].
(b) Operate the buttons [8] and [9] to set the temperature.
(c) Press the button [6] to confirm and return to normal operation.
4. Set the running time:
(a) Press the SET button [6] two times.
(b) Operate the buttons [8] and [9] to set the time.
(c) Press the button [6] to confirm and return to normal operation.
* The appliance will automatically leave the settings menu after 1 minute of no interaction by the user.
EN
1. Temperature display
2. Time display
3. Time countdown indicator
4. Heater run indicator
5. Overtemperature indicator
6. Setting button (SET)
7. Next Item button
8. Down arrow
9. Up arrow
