cecotec CONGA ROCKSTAR 6500 CENTURY ERGOWET Manual De Instrucciones página 49

packaging is disposed of, make sure all packaging materials are recycled accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
- Fully charge the appliance before first use.
- The normal charge time is 5 hours approx. When the battery is fully charged, unplug it.
Box content
- Conga Rockstar 6500 Century ErgoWet vacuum cleaner
- 2-in-1 accessory (furniture and upholstery accessory)
- Accessories for corners
- Water tank
- Jalisco brush
- ErgoFlex Tube
- Wall bracket
- Power adapter
- Instruction manual
3. PRODUCT ASSEMBLY
Assembling the suction tube and vacuum base
Fig. 3
- To install the vacuum head into the suction tube, match both parts ensuring the tab on
the vacuum head matches the guides on the tube, and insert the tube into the vacuum
head until firmly fixed.
- To disassemble them, press the vacuum-head release button, and pull from the suction
tube while firmly holding the vacuum head.
Note
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, vacuuming brush head, and main body assembly
Fig. 4
To complete the vacuum cleaner's installation, once the vacuum head is mounted on the
suction tube, hold the tube vertically and insert it into the main body.
Battery assembly
Fig. 5
- To assemble the battery, insert it in the hole in the end of the main body.
- To remove the battery, press the battery release button and pull outwards to remove it.
Note
Remove the battery and store it in a safe, dry place if the appliance is not going to be used in
a long period of time.
CONGA ROCKSTAR 6500 CENTURY ERGOWET
ENGLISH
49