Wahoo KICKR BIKE SHIFT Manual Del Propietario E Instrucciones Para La Instalación página 11

KICKR BIKE SHIFT SETUP
8. Some pedal axles may require the use of
pedal washers for necessary clearances to
KICKR BIKE SHIFT housings.
The KICKR BIKE SHIFT crank arm is designed
for you to customize your bike fit. This design
accommodates 165mm, 167.5mm, 170mm,
172.5mm and 175mm crank lengths by simply
moving your pedal to the corresponding hole
on the crank arm.
9. Identify the left and right pedals.
Grease the threads on both pedals.
Thread the right pedal into the drive
side crank using washer for correct
spacing (if needed). Use a wrench to
ensure snug fit. Thread the left pedal
into non drive side crank using washer
for correct spacing (if needed). Use a
wrench to ensure snug fit.
10. Use the included AC power adapter to connect the KICKR BIKE SHIFT
to a standard wall outlet.
WARNING
To avoid risk of fire or electric shock, only use the
included power adapter with the KICKR BIKE SHIFT.
Tightening torque
6
mm
NOTE: Pedal threads are different from left
to right. Right side pedals have right-hand
threads (removes counterclockwise,
installs clockwise). The left side pedal has
left-hand threads (removes clockwise,
installs counterclockwise). Improper
installation or cross threading can cause
damage to the KICKR BIKE SHIFT's cranks.
30 - 35 N- m
11