LEGRAND C2G C2G31015 Manual Del Usuario página 8

HDMI Ultra-Slim HDBaseT + RS232 And IR Over Cat Extender Box Receiver - 4k 60hz
Upgrade
This product supports firmware upgrading through RS232 port. Please contact your supplier to get the latest upgrade tool
"Legrand Product Firmware Updater".
Warning: Do not power off the device during upgrading process.
To upgrade MCU firmware of the device, perform the following:
1. Set the DIP switch of the device to "MCU" position.
2. Connect the device to a PC using a USB Type-A to 3-pin phoenix connector cable.
3. Connect the power adapter provided to the device, and power on the device.
4. Click to run the "Legrand Product Firmware Updater" software. The following window will appear on the next page:
6
(us) (us)
(us)