Idiomas disponibles
Idiomas disponibles
SPECIAL SAFETY INSTRUCTIONS FOR THE KETTLE
• Use only cold water when filling the device.
• The water level must be between the MAX. and MIN. marks.
• Switch the kettle off before removing it from the base.
• Always ensure that the lid is tightly closed.
• The base and exterior of the kettle must not become wet.
• Kettle body used must match with the kettle base.
• The tea filter only can put tea inside it. You can use the kettle without the filter.
First Use of the Kettle
Before using the kettle for the first time, fill the kettle with cold water and boiled it twice without any
additives.
1. Fill the kettle with water. Do not overfill. Use the water level indicator.
2. Place the kettle on the base.
3. Electrical connection:
• Check whether the electrical voltage which you intend to use is the same as that of the
kettle. Details can be found on the label on the base of the kettle.
• Only connect the kettle to a properly installed 220-240V~ 50-60Hz socket.
4. Press the button on the handle to position "I" to switch on. The LED light on the base will light
up indicating that the water is being boiled.
5. After boiling the water, the kettle and the light switches off automatically.
6. Disconnect the kettle from the mains electricity supply.
13
A
B
D
C
PRODUCT DIAGRAM
A- TEA FILTER
B- LID
C- BASE
D- KETTLE
