Samsung WF448AAW Manual Del Usuario página 17

My cycle
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one-button
convenience.
By pushing the My Cycle button, you activate the settings used during the My Cycle mode.
The "My Cycle" light will indicate activation.
You can select all options as follows in "My Cycle" mode.
1. Select cycle using the Cycle Selector dial.
2. After cycle selection, set each option.
(_See 28 for available with each
page option settings cycle.
3o Then, you can start "My Cycle" by pushing the Start/Pause button in "My Cycle" mode.
The cycle and options you select will be displayed the next time you choose "My Cycle".
You can change the "My Cycle" settings by repeating the same process above.
The last used setting will be displayed the next time you choose "My Cycle".
Washing clothes using the cycle selector
Your new washing machine makes washing clothes easy, using Samsung's "Fuzzy Control"
automatic control system. When you select a wash program, the machine will set the correct
temperature, washing time, and washing speed.
1, Turn on your sink's water tap.
2. Press the Power button.
3, Open the door.
4, Load the articles of clothing one at a time loosely into the drum, without overfilling it.
5o Close the door.
6, Add detergent, softener, and pre-wash detergent (if necessary) into the appropriate
compartments.
_ Pre-wash is only available when selecting the Cottons, Synthetics, Denim, Sports Wear,
Baby Care, Dark Garment and Daily Wash cycles. It is only necessary if your clothing is
heavily soiled.
2, Use the Cycle Selector to select the appropriate cycle according to the type of material:
Normal, Whites, PermPress,Sanitize, Towels, Bedding, Delicates, Hand Wash, Wool, Quick
Wash, Rinse + Spin, Spin Only, SteamCare, Heavy Duty. The relevant indicators will illuminate
on the control panel.
8, At this time, you can control the wash temperature, the number of rinse cycles, the spinning
speed, and the delay time by pressing the appropriate option button.
9, Press the Start/Pause button on the Cycle Selector and the wash will begin. The process
indicator will light up and the remaining time for the cycle will appear in the display.
Pause Option
1. Within 5 minutes of starting a wash, it is possible to add/remove laundry items to the wash.
2, Press the Start/Pause button to unlock the door.
3, The door cannot be opened when the water is too HOT or the water level is too HIGH.
4, After closing the door, press the Start/Pause button to restart the wash.
When the cycle is finished:
After the total cycle has finished, the power will turn off automatically.
1, Open the door.
2, Remove laundry.
Wash nga cad of aundry 17
'WT448AAW-0_535A-0_ EN.mdd 17 2008-05-06 ;AE,i%2:z3:z3