Idiomas disponibles
Idiomas disponibles
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed.
Use of the power tool for operations diff erent from
those intended could result in a hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease.
Slippery handles and grasping surfaces do not allow
for safe handling and control of the tool in unexpected
situations.
5) Service
a) Have your power tool serviced by a qualifi ed
repair person using only identical replacement
parts.
This will ensure that the safety of the power tool is
maintained.
PRECAUTION
Keep children and infi rm persons away.
When not in use, tools should be stored out of reach of
children and infi rm persons.
SPECIFICATIONS
Voltage (by areas)*
Power Input
No-load speed
Full-load impact rate
Capacity:
concrete
steel
wood
Weight**
Dust collecting adapter
Max. hole-drilling depth:
Diameter of drill:
Max. length of drill (eff ective length):
Dust box capacity:
*
Be sure to check the nameplate on product as it is subject to change by areas.
** According to EPTA-Procedure 01/2014.
STANDARD ACCESSORIES
(1) Plastic case ..................................................................1
(2) Side handle ..................................................................1
(3) Stopper ........................................................................1
(4) Cover ...........................................................................1
(5) Rubber cap (replacement) ...........................................1
Standard accessories are subject to change without notice.
ROTARY HAMMER SAFETY WARNINGS
Safety instructions for all operations
1. Wear ear protectors
Exposure to noise can cause hearing loss.
2. Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
3. Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring or its own
cord.
Cutting accessory contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
Safety instructions when using long drill bits with
rotary hammers
4. Always start drilling at low speed and with the bit tip
in contact with the workpiece.
At higher speeds, the bit is likely to bend if allowed to
rotate freely without contacting the workpiece, resulting
in personal injury.
5. Apply pressure only in direct line with the bit and do
not apply excessive pressure.
Bits can bend causing breakage or loss of control,
resulting in personal injury.
(110 V, 115 V, 120 V, 127 V, 220 V, 230 V, 240 V)
720 W
0–1050 min
0–4000 min
4–28 mm
13 mm
32 mm
4.1 kg
85 mm (adjustment possible between 0 and 85 mm)
4–18 mm
100 mm
0.4 liters
English
–1
–1
11
