Fein SCT 5-40 Manual De Instrucciones página 10

3 41 01 033 06 8 - Buch Seite 10 Donnerstag, 4. September 2003 3:43 15
EN
Operating instructions for screwdriver.
Overview.
1 Stop
Setting the screwing depth.
2 Torque adjusting key (SCT 5-40 U)
For setting the torque.
3 Hand strap
For holding the device firmly and less-
ening the strain on the hand.
4 Selector switch for clockwise and
anti-clockwise rotation
Select when power tool is at a stand-
still.
5 Switch
For switching ON/OFF (a),
Locking for continuous mode (b).
6 Supplied accessories
Bit 1/4" for Phillips screws size 2,
Form H with dust protection ring (c),
Magnetic holder (d) for bits,
Wrench (e) (SCT 5-40 U),
Bit stop (f),
Bit 1/4" for Pozidriv screws size 2 (g),
Form Z (SCT 6-25).
For your safety.
Before using this power tool, read
and comply with:
these operating instructions,
the enclosed safety instructions
(document number 3 41 30 054 06 1),
the relevant national industrial safety
regulations.
10
SCT 5-40 / SCT 5-40 U / SCT 6-25
These operating instructions and the
enclosed safety instructions should be
kept carefully for later use and enclosed
with the power tool, should it be passed
on or sold.
Intended use.
This power tool is intended for:
commercial use in industry and trade,
for driving and removing screws, espe-
cially for use in drywall construction using
fast feed screws, self-drilling screws and
wooden screws,
for applications using the accessories given
in these operating instructions, or those
recommended by FEIN.
SCT 5-40/SCT 6-25: Screwing should be
carried out using the bit stop.
Safety instructions.
!
Risk of injury
Hold the power tool firmly.
Only work with undamaged insert.
Beware of any concealed electric cables,
gas or water conduits; check the working
area with a metal detector, for example.
Do not rivet or screw any name-plates or
signs onto the power tool. The protective
insulation can thereby be rendered inef-
fective. Adhesive labels are recom-
mended.
Only use an undamaged plug and cable.
!
Damage to property/material
The mains voltage must correspond with
the voltage specifications on the power
tool.
Personal protective equipment.
When using this power tool wear the fol-
lowing protective items:
sturdy shoes, hair net (for long hair).