Idiomas disponibles
Idiomas disponibles
PREPARE SUPPORT FRAME
8 AND 9-FOOT CEILINGS
1. Measure the ceiling height and determine
distance between the cook top and bottom
of hood.
2. Remove (4) screws and washers in the
height adjustment slots. Figure 8.
3. Per the chart, adjust overall tenght of the
support frame. Figure 8.
4. Reinstall (4) screws and washers in the
height adjustment slots. Figure 8.
HEIGHT
ADJUSTMENT
SLOTS
FRONT
CEILING
HEIGHT
DUCT METHOD
8 FOOT
DUCTED
CEILING
NON DUCTED
9 FOOT
DUCTED &
CEILING
NON DUCTED
10 FOOT
DUCTED &
46"
45"
44"
43"
42"
41"
40"
CEILING
NON DUCTED
see note
b)
HOOD DISTANCE ABOVE 36" HIGH COOK TOP (See note a)
24" I 25" I
26" !
27" I
2a" I
29" I ao"
LENGHT OF SUPPORT FRAME, DIMENSION "A"
2Z'
21"
I
.
.
22"
21"
•
•
•
•
i
-
32"
31"
30"
29"
28"
I
Notes:
a. Minimum hood distance above cook top must not be tess than 24".
A maximun of 30" above cook top is highly recommended
for best capture of
cooking
impurities.
Distances over 30" are at the instalter's and user's discretion; providing that
ceiling height and flue length permit.
b. Requires optional 10-foot flue extension.
10-FO0 T CEILINGS
Note: The following
materials must be purchased separately for 10-foot ceiling
installations.
•
Flue extension model FX54SS for ducted installations
•
Flue extension model FXN54SS for non-ducted installations
5. Discard the upper support frame half supplied with the range hood. Replace with
the longer upper support frame supplied with the flue extension.
6. Follow steps 1 through 4 shown above.
-9-
