Hisense babysense V24R-1 Manual De Usuario página 9

10. Troubleshooting
Problem
Possible cause(s)
No reception on the Parent Unit
• The power adapters may not be properly connected.
• Ensure that the Baby and Parent Units are ON.
• Make sure the Baby Unit and Parent Unit are not far away
from
• Baby Unit and Parent Unit may not be properly paired.
Follow PAIRING instructions.
Interference or poor reception
• Move the Baby Unit closer to Parent Unit.
• The Baby or Parent Units may be too close to metal
objects.
• Other electronic devices may be interfering with the signal.
• The battery power may be too low.
Image frozen on the Parent Unit
• Restart the Baby Unit (pull out the power adapter from the
wall outlet, wait for approx. 5 seconds and plug it back in).
• Reset the Parent unit by opening the battery compart ment
and disconnecting the battery.
Wait for 30 seconds and then reconnect the battery.
16
each other.
11. Technical Data
Frequency • 2.4GHz FHSS
Operating Range • Up to 960 feet (open space)
Power Adapter • Input: 240-100VAC 60 / 50Hz, 200mA Max;
• Output: 5V, 700mA;
LCD Screen • 2.4" TFT LCD
Rechargeable battery • Model: YB 503450
(pre-installed in Parent Unit) • 3.7V, 950 mAh, 3.515Wh
Operating time with battery • Approx. up to 10 hours (ECO on)
fully charged (Parent Unit)
Transimitting Power • 18dBm Max
Image sensor type • 1/6.5 " Color CMOS
IR LED Type • 940nm
Operation Environment • Indoor use only; Temperature: 104-32 °F
• Humidity: 5% to 90% rh. (relative humidity)
17