Wannyton ACF02A Serie Instrucciones De Instalación página 7

Idiomas disponibles
  • ES

Idiomas disponibles

The buttons on the remote control and the control panel share the
same functions and work with the same operation method.
1. ON/OFF & Speed Button
Plug in and you can hear an audible sound, the power indicator lights
up. Touch the other buttons, the corresponding indicator lights up
shortly and then automatically turns off.
Touch the button
, it works at a low speed. The indicator
up, and it works in normal
wind mode.
Touch the button
again, it works at a medium speed. The indicator
lights up.
Touch the button
again, it works at a high speed. The indicator
lights up.
Touch the button
to set the wind speed sequentially from low to
medium to high speed.
2. Cool Button
Touch the button
to generate cool winds, and the indicator
lights up. It will become cooler if you have added the ice crystal
boxes.
Warning: When the water level in the water tank is too low or there is
no water, the cooling air function is prohibited.
3. Swing Button
Touch the button
, the blades oscillate left to right and the
indicator
lights up.
4. Timer Button
Touch the button
to set the timer ranging between 1-12 hours, it
reads the digital number you set on the display and the indicator
lights up.
5. Mode Button
Touch the button
to select the desired wind mode as per the
following sequence: Normal
-Natural
Warning: When it works with the cooling function, do not lift up and
move the appliance, which may lead water to enter the electrical
components, damage the appliance and cause danger.
lights
-Sleep
.
11
Water Pump Installation
Take out the water pump clamp and the thumbscrew, fix the water pump clamp
to its position as shown in Figure 1 below, then put the thumbscrew through the
clamp and tighten the thumbscrew clockwise.
The installation is as shown in Figure 2.
Attach the water pump to its position as shown in Figure 3 below, and pay
attention to the direction when installation.
Finally, rotate the water pump clamp to lock the water pump as shown in Figure
4 below, and the installation is completed.
Figure 1
Figure 3
12
Figure 2
Figure 4
loading

Este manual también es adecuado para:

Acf02al