Lenco DAR-017 Manual Del Usuario página 13

The Hour digit will start to flash. Rotate the ok knob to choose correct hour and press the ok knob to
confirm.
The Minute digit will start to flash. Rotate the ok knob to choose the correct minute and press the ok
knob to confirm.
Now you have finished the time/date configuration.
Auto update: Choose from what source the radio will update the time automatically.
You can choose the following options:
- From Any: updates the time from DAB or FM signal
From Digital Radio update: updates the time from the DAB signal
-
From FM: updates the time from an RDS channel
-
No update: If you want to set the time manually
-
Set 12/24 hour: Rotate the ok knob to choose to set 12 hour- or 24 hour time display
Set date format: Rotate the ok knob to choose DD-MM-YYYY or MM-DD-YYYY.
Backlight: Timeout: off-10 sec-20 sec-30 sec-45 sec-60 sec-90 sec-120 sec-180 sec
On level: High-Medium-Low
Dim level: High-Medium-Low-Off
Language: English, Italian, Deutsch, Francais, Nederlands, Spanish
Factory reset: Press the Ok knob and choose 'Yes' to start factory reset.
Software update: Press the ok knob and choose "yes" to update the software if needed. Updating
can only be done with a micro usb cable and connect to computer.
Notes: only select the software update option if you have an update for this unit. (if you accidently
selected this option, use the power off/on the restart the radio)
SW version: Press OK to view system version.
13