Lenco DAR-017 Manual Del Usuario página 10

In DAB mode, press Menu button and rotate the ok knob to select 'Full Scan' then short press the ok
knob to start the DAB full scan. When the scan is finished, the radio will return to the last played
DAB radio station. All stations found will be listed in the station list, which is shown when pressing
the 'stations' button.
Please note that the available DAB+ radio stations differ per region/city
DAB Mode- Manual tune
This function allows a specific or new ensemble to be manually added to the stations already
available on the radio.
In DAB mode, press the Menu button and use the ok knob to navigate until "Manual tune" is
highlighted, press the ok knob to confirm.
Use the ok knob to navigate until the desired frequency is selected and then press the ok knob, the
frequency and name of the ensemble and the signal strength will be displayed.
Press the ok knob again to add the ensemble and automatically tune to that station.
DAB Mode- Prune Invalid
This function will remove unavailable stations from the station list. Press the Menu button. Use the
ok knob to navigate to the "Prune Invalid" option and press the ok knob to confirm.
Rotate the ok knob to select (yes) to proceed to prune the invalid/unavailable stations. If (No) is
selected the operation will be cancelled.
DAB Display modes, station Information on DAB Mode
Signal Strength: Displays a signal bar with the strength of the current station. Bit Error Rate (BER):
Provides details of the signal error rate.
Channel and Frequency: Displays the station's transmission channel number and frequency.
PTY (Program Type): Shows the type and description of the program provided by the DAB station.
Time and Date: Displays the time and date information provided by the broadcaster.
10