TheSpace NSV500 Manual De Uso página 9

6 Set
7 Knob
8 Start/Stop
Temperature
9
display
10 Time display
11 ° C/° F
12 Wi-Fi indicator
13 Heating
14 Vacuum pump
15 Lock/Unlock
16 Lid button
Restore factory
17
settings
Settings: After selecting the target mode, you can press this button and
enter temperature and time settings. When the number on the display
flashes, turn the knob to adjust temperature and time.
View settings: During operation, press and hold the "Set" button for
about 3 seconds, and you can check the time and temperature
settings.
If there is no operation in the setting mode, the number on the display
will flash 10 times before the device automatically exits the settings.
Adjust the target time and temperature by turning the knob when the
corresponding number on the display flashes.
Press the button to start the machine in the selected mode.
Displays the current temperature or the set temperature.
Displays the operating time or the set time.
In standby mode, press and hold the "Manual" and "Marinate" buttons
for a few seconds to switch the temperature units: ° C or ° F.
The Wi-Fi indicator is on when the device is connected to the mobile
app.
When this icon is on, it means the device is heating up.
When this icon is on, it means the device is vacuuming.
When the "unlock" icon is on, the lid can be opened.
When the "lock" icon is on, it means that the machine is working, and
the lid is not allowed to open. If you want to open the lid, you need to
stop the machine, and open it when the "unlock" icon lights up.
Press the lid button to open the lid.
In the standby mode, long press the "Mild Sear" button and "Manual"
button simultaneously for 3 seconds. When you hear a "beep" sound,
the machine switches to NeoVide mode (the displayed temperature is
60° C and the timer is 24:00), then you can release the buttons. The
machine is then under factory settings.
9