Tennant S880 Manual De Instrucciones página 15

Idiomas disponibles

Idiomas disponibles

WET batteries, preparation:
! DANGER: The operations of preparing,
installing, connecting and removing the
batteries must be entrusted to a TENNANT-
approved service technician (referred to
hereinafter as skilled technician).
! DANGER: during installation of the batteries
or any type of battery maintenance, the skilled
technician must wear the Personal Protective
Equipment (gloves, eyewear, overalls, etc.)
needed to limit the risk of accidents. Keep away
battery poles, do not generate sparks and do
not smoke.
!
following precautions:
Contact with the skin can cause irritation; wash
with soap and water.
Inhalation of vapours can cause irritation to the
airways; stay out in the open air and consult a
doctor.
Contact with eyes can cause irritation, wash
eyes immediately and thoroughly with water for
at least 15 minutes; consult a doctor.
Batteries: installation and connection
! DANGER: during installation of the batteries
or any type of battery maintenance, the skilled
technician must wear the Personal Protective
Equipment (gloves, eyewear, overalls, etc.)
needed to limit the risk of accidents. Keep away
battery poles, do not generate sparks and do
not smoke.
!
following precautions:
Contact with the skin can cause irritation; wash
with soap and water.
Inhalation of vapours can cause irritation to the
airways; stay out in the open air and consult a
doctor.
Contact with eyes can cause irritation, wash
eyes immediately and thoroughly with water for
at least 15 minutes; consult a doctor.
! ATTENTION: the operation of installing and
connecting the batteries must be carried out by a
skilled technician.
! ATTENTION: when installing and connecting
the batteries, ensure that the battery charger is
unplugged from the power socket.
! ATTENTION: before carrying out the operations
apply the parking brake.
! DANGER: make certain the terminals marked
with the "+" symbol are connected to the
positive poles of the battery. Do not check the
battery charge by sparking.
Tilt the seat cowling toward the steering wheel, then place
the batteries in the compartment, positioning them as
indicated by the drawing.
Connect the wiring terminals to the battery poles, tighten
and smear with Vaseline.
Return the seat cowling to the working position.
When using the machine, follow the instructions below.
EN
ETET17215
15
loading