Idiomas disponibles
Idiomas disponibles
The operation of any tiller can result in foreign objects thrown into the eyes,
which can result in severe eye damage.
Always wear safety glasses or eye
shields before starting your tiller and while tilling.
We recommend
standard
safety glasses or a wide vision safety mask worn over spectacles.
HOW TO USE YOUR TILLER
Know how to operate all controls before
adding fuel and oil or attempting to start
engine.
STOPPING
TINES AND DRIVE
1. Release drive control bar to stop
movement.
2. Move shift lever to "N" (neutral)
position.
ENGINE
• Move throttle control to "STOP" posi-
tion. If equipped
with stop switch, move
switch to "STOP" position.
NOTE: Never use choke to stop engine.
Drive Control Bar
"ENGAGED'
Shift Lever
HARD TO SHIFT GEARS
• Briefly engage drive control bar and
release or rock tiller forward and
backward
until are able to shift gears.
DEPTH
STAKE
The depth stake can be raised or
lowered to allow you more versatile
tilling and cultivating,
or to more easily
transport
your tiller.
Shallowest Tilling
Deepest Tilling
Depth Stake
_'Transport
Position
J
DRAG STAKE
Drive Control Bar
"DISENGAGED"
Position
The drag stake should be raised when
tilling the counter rotating (_) till position.
The drag stake should be lowered when
tilling in the forward rotating (_;) till
position.
TINE OPERATION
- WITH WHEEL
DRIVE
• Always release drive control bar before
moving shift lever into another posi-
tion.
• Tine movement is achieved by moving
shift lever to either the counter rotating
(_,) till position or the forward
rotating
(_) till position and engaging drive
control bar.
FORWARD
- WHEELS ONLY/TINES
STOPPED
• Release drive control bar and move
shift lever indicator to "F" (forward)
position. Engage drive control bar and
tiller will move forward.
REVERSE - WHEELS ONLY/TINES
STOPPED
1. DO NOT STAND DIRECTLY
BEHIND
TILLER.
2. Release the drive control bar.
3. Move throttle control to "SLOW"
position.
4. Move shift lever indicator to "R"
(reverse) position.
5. Hold drive control bar against the
handle to start tiller movement.
J
Lowered _
(Forward Rotating till)
Raised
(Counter rotating till)
9
TILLING
NOTE: Use the counter rotating tine drive
when tilling hard or rockey soil, virgin
ground or sod.
1. Release depth stake and drag stake
pins. Pull the depth stake up for
increased tilling depth.
Raise the
drag stake, Place proper pin in hole of
depth stake or drag stake to lock in
position.
2.
Place shift lever indicator in counter
rotating (_) till position.
3. Hold the drive control bar against the
handle to start tilling movement.
Tines
and wheels will both turn.
