Idiomas disponibles
Idiomas disponibles
INSERT CABLE CLIP
• Insert plastic cable clip into hole on the
back of handle column,
Push cables
into clip.
Handle Column
Cable Clip
CONNECT
SHIFT ROD
1
Insert end of _.h,fl rod ,ntO h_l_ of Sh,q
lever rod,cater
2
Insert
ha,fp_n chp lhtouqh
hOIe Of shift
rod
|0
Secure
I_
,1_,,,_ CT p
h_,] ".'ltOf
REMOVE TILLER FROM CRATE
1. Adjust handle assemby to lowest
position. Be sure lock lever is tight-
ened securely.
2, Make sure shift lever indicator is in "N"
(neutral)
position.
3, Tilt tiller forward by lifting handle.
Separate cardboard
cover from
leveling
shield.
4. Rotate tiller handle to the right and
pull tiller out of carton.
CHECK
TIRE PRESSURE
The tires on your unit were overinflated
at
the factory
for shipping
purposes.
Correct
and equal
tire pressure
is important
for
best
hllmg performance.
• Reduce
hre pressure
to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to
better suit operator.
(See "TO ADJUST
HANDLE HEIGHT"
in the Service and
Adjustments
section of this manual).
7
