EN
ORIGINAL INSTRUCTIONS
Safety, performance, and dependability have been given top
priority in the design of your clamp fan.
INTENDED USE
The clamp fan is intended for general ventilation of most
household spaces.
Do not use the product for any other purpose. Use of the
product for operations different from intended could result in
a hazardous situation.
FAN SAFETY WARNINGS
This appliance can be used by children aged from 8 years
and above and persons with reduced physical, sensory, or
mental capabilities or lack of experience and knowledge if
they have been given supervision or instruction concerning
use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
The product is intended for use only when it is clamped.
Do not use the product with it resting on any surface.
Do not use the product to exhaust hazardous or
explosive materials and vapours. The product is
intended for general ventilation only.
Stay alert, watch what you are doing, and use common sense
when operating the product. A moment of inattention while
operating the product may result in serious personal injury.
It is possible that unsecured hair may be drawn into the
product and may become entangled, causing injuries.
Keep loose or flying hair away from the product at all times.
Under extreme usage or temperature conditions, battery
leakage may occur. If liquid comes in contact with your
skin, wash immediately with soap and water. If liquid gets
into your eyes, flush them with clean water for at least 10
minutes, then seek immediate medical attention.
Rechargeable batteries to be removed from the product
before being charged.
Exhausted batteries are to be removed from the product
and safely disposed of.
If the product is to be stored unused for a long period,
remove the batteries.
Do not use non-rechargeable batteries in place of
rechargeable batteries.
The supply terminals are not to be short-circuited.
Do not use modified or damaged batteries.
Do not expose the product or battery to excessive
temperatures.
Be aware of the risk of terminals of the battery-operated
appliance or battery being short-circuited by metal objects.
BATTERY SAFETY WARNINGS
To reduce the risk of fire, personal injury, and product
damage due to a short circuit, never immerse your tool,
battery pack, or charger in fluid or allow fluid to flow inside
them. Corrosive or conductive fluids, such as seawater,
certain industrial chemicals, and bleach or bleach-
containing products, etc., can cause a short circuit.
When battery is not in use, keep it away from other metal
objects such as paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery
terminals together may cause sparks, burns, or a fire.
Do not expose a battery pack or tool to fire or excessive
temperature. Exposure to fire or temperature above
130°C may cause explosion.
CHARGING THE BATTERY PACK WITH A USB-C CABLE
Battery packs are shipped in a low charge condition
to prevent possible problems. Therefore, they should
be charged prior to first use. If the charger does not
charge the battery pack under normal circumstances,
return both the battery pack and charger to your nearest
authorised service centre for an electrical check.
Refer to the battery operator's manual for charging instructions.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling when
transporting batteries by a third party. Ensure that no batteries can
come in contact with other batteries or conductive materials while
in transport by protecting exposed connectors with insulating, non-
conductive caps or tape. Do not transport batteries that are cracked
or leaking. Check with the forwarding company for further advice.
KNOW YOUR PRODUCT
See page 36.
1. Adjustable head
2. LED indicator
3. 2-speed switch
4. Clamp
5. Rotatable stand
6. Battery port
7. USB charging cable
8. Operator's manual
9. USB power adaptor
MAINTENANCE
Use only original accessories and spare parts. Should
components that have not been described need to be
replaced, please contact an authorised service centre. All
repairs should be performed by an authorised service centre.
Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal injury.
SYMBOLS ON THE PRODUCT
Direct current
Please read the instructions carefully before
starting the product.
Do not dispose of waste batteries, waste electrical
and electronic equipment as unsorted municipal
waste. Waste batteries and waste electrical and
electronic equipment must be collected separately.
Waste batteries, waste accumulators, and light
sources have to be removed from the equipment.
Check with your local authority or retailer for
recycling advice and collection point. According to
local regulations, retailers may have an obligation to
take back waste batteries and waste electrical and
electronic equipment free of charge. Your contribution
to the reuse and recycling of waste batteries and
waste electrical and electronic equipment helps to
reduce the demand of raw materials. Waste batteries,
in particular containing lithium, and waste electrical
and electronic equipment contain valuable and
recyclable materials, which can adversely impact the
environment and the human health if not disposed
of in an environmentally compatible manner. Delete
personal data from waste equipment, if any.
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
UK
TR
EL
3
