NEFF T44T43N0 Instrucciones De Uso página 64

Display
Malfunction
EÖ +
Electronic system
number/ malfunction
p + number/
 + number/
Erdi The control knob was
dragged instead of turning
it towards the intended
hotplate
F0/F9
There is an internal error
in the system
F2
The electronic system has
overheated and the
corresponding hotplate
has been switched off
F4
The electronic system has
overheated and all the
hotplates have been
switched off
{b
Incorrect supply voltage,
outside normal operating
limits
{c/{d
The hotplate has
overheated and has
switched off in order to
protect the hob
Do not rest hot pans on the control panel.
64
Measure
Disconnect the cooking hob from the mains. Wait a few
seconds before connecting it again.
If the indication continues, notify the technical assistance
service.
Wait a few seconds, then correctly switch on the hob and
hotplate once again.
Disconnect the cooking hob from the mains. Wait a few
seconds before connecting it again.
If the indication continues, notify the technical assistance
service.
Wait until the electronic system has cooled down
sufficiently. Then press any symbol on the hob.
If the indication continues, notify the technical assistance
service.
Wait until the electronic system has cooled down
sufficiently. Then press any symbol on the hob.
If the indication continues, notify the technical assistance
service.
Please contact the local electricity board.
Wait until the electronic system has cooled down
sufficiently before switching the hob back on.