Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Replacing Oven Light Bulb
Warning
To avoid electrical shock which can
cause severe personal injury or death,
unplug power cord or open circuit
breaker to oven before replacing light
bulb. After replacing light bulb, restore
power.
Caution
To avoid personal injury or property
damage, observe the following:
1.
Allow oven and light bulb to cool.
2.
Wear gloves when replacing light
bulb.
Tools Needed
• Protective gloves
• Phillips screwdriver
• 40-watt, 250-volt appliance bulb (available
from authorized distributor or servicer)
1. Remove screw from access cover on top left
wall of oven exterior. Remove access cover.
2. Remove old bulb and replace with new bulb.
3. Replace access cover and screw by reversing
procedure in step 1.
To remove bulb,
turn in direction
shown.
Service Codes
During operation, oven display may show the following
service codes:
SERVICE
1
SERVICE
2
SERVICE
3
SERVICE
4
SERVICE
4P
SERVICE
5
SERVICE
6
SERVICE
7
SERVICE
8
HOT
PLEASE WAIT
Important
Contact an authorized servicer if oven display shows
any code. Service must be performed before using
equipment.
* If display shows "HOT PLEASE WAIT"
equipment is overheated. Equipment
automatically interrupts cooking sequence and
turns on cooling fan until normal temperature is
reached. When oven cools to normal
temperature, oven resumes normal operation.
19
Capítulos
Tabla de contenido
