Costway ES10100DE Manual Del Usuario página 7

Assembly - Hanging the Fan( continued)
Connecting lamp wire
Assembly - Attaching the Lights
Phillips
screwdriver
Tighten the screw of the box cover
12
1.Insert the "white" line in the
switching box of themotor into
the "white"line of the light and
tie insulated rubber tape.
2.Insert the "blue"line in the
switching box of the motor into
the "blue"line of the light and
tie insulated rubber tape
1.Take the wire
into the switching
box of the motor.
2.Align the
opening of
switching box of
the light at switch
locking position of
the forward and
reverse rotation of
the motors
switching box.
Place the
cover.Screw in
the screw of the
switching box.
Assembly - Attaching the Lights Assembly - Attaching the Lights
WARNING:Allow the shatter resistant bowl to cool completely
before removing.
CAUTION: Make sure the power is off before attaching or
removing the shatter resistant bowl.
CAUTION: Do not over tighten the hex nut,over tightening the hex
nut may cause the shatter resistant bowl to break.
Install the crystal shade & bulb
Use of remote control
LIGHT ON/OFF
Auto off after 1hr
Auto off after 2hrs
Auto off after 4hrs
8 Auto off after 8hrs
Low Fan Speed
Middle Fan Speed
High Fan Speed
Fan Stop
ONLY USE E27 BULB
13
EN