Idiomas disponibles
Idiomas disponibles
Safety Information
1.To reduce the risk of electric
shock,the electricity has been
turned off at the circuit breaker or
fuse box before begin.
2.The outlet box and support
structure must be securely
mounted and capable of reliably
supporting 35lbs(15.9kg).
3.The fan must be mounted with a
minimum of 2.3m(7.5ft) clearance
from the trailing edge of the blades
to the floor.
4.Do not operate the reversing
switch while the fan blades are in
motion. You must turn the fan off
and stop the blades before you
reverse the blade direction.
of the blades.
damage to the fan and other
items, please be careful when
walking around or cleaning the fan.
7.After making electrical
connections , spliced conductors
should be turned upward and
pushed carefully up into the outlet
box. The wires should be spread
apart with the grounded
conductor and the
equipment-grounding conductor on
one side of the outlet box.
8.All setscrews must be checked
and retightened where necessary
before installation.
To reduce the risk of personal
brackets (also referred to as
flanges) during assembly or after
in the path of the
blades.
Remove the rubber motor stops
on the bottom of the fan before
installing the blades or testing the
motor.
To reduce the risk of fire or
electric shock, do not use this fan
with any solid-statespeed control
device.
To avoid possible electric shock,
turn the electricity off at the main
fuse box before
wiring.If you feel you do not have
enough electrical wiring
knowledge or experience,contact
a licensed electrician.
To reduce the risk of fire, electric
to outlet box marked "Acceptable
for fan support of 35 lbs.(15.9
kg)or less" and use the screws
provided with the outletbox.
02
Pre-Installation
SPECIFICATION
0 19
.
20
90
220 -
0 27
.
39
131
240
0 50
.
60
180
The above data are for reference only, actually the motor speed of each
as standard.
These are a pproximate measures. They do not include the
amps and wattage used by the light kit.
TOOLS REQUIRED
Flat blade
Phillips
screwdriver
screwdriver
Wire stripper
Cubic
Meter
2659
16.71LBS 19.84LBS
2 47
.
0.07m³
3906
7 58KG
.
9 00KG
.
cu.ft
5540
Step ladder
Electrical tape
03
EN
