Idiomas disponibles
Idiomas disponibles
1.1.3 MONOSTABLE / BISTABLE
For (non roller shutter) ON/OFF type controls, it is possible to choose that the operating mode be monostable
or bistable (stepper).
IN this case too, programming is done in sequence for each column. The LEDs for the columns not already
chosen for the roller shutter mode switch on, blue if they are in bistable mode and red for monostable mode
(default). This situation is inverted by touching the individual zone.
In the example below, columns 1 and 3 have already been chosen as sensitive zones for roller shutter mode
(see previous paragraph), and so the sequence begins with column 2.
MONOSTABLE
BISTABLE
Depuis le menu volet roulant/bouton, appuyer sur la touche P1 une fois et choisir la fonction souhaitée.
FRANÇAIS
66
