Idiomas disponibles
Idiomas disponibles
1.1.1
SENSITIVE ZONES
Breaking down the sensitive zones into three columns depends on the first programming step, during which
a choice can be made of which of the zones is to be used to control the roller shutters. A dual Touch button
control can be used, functionally interlocked (at the top and bottom), with Up/Stop and Down/Stop functions
respectively.
Programming is done in sequence for each column. The blue LEDs are switched on if the roller shutter oper-
ation is not associated, and the red LEDs if it is already active. By touching the inactive zone, the situation is
inverted.
Once 3 seconds has passed since the last touch, columns 2 (central) and 3 (right) are proposed again. Wait
for 5 sec to go to the next column without any changes.
1
2
3
ENGLISH
35
