Idiomas disponibles
Idiomas disponibles
The factory set temperature for comfortable mode is
21ºC and for energy saving mode 17ºC.
Pressing the comfortable mode / energy saving mode
key for 5 seconds accesses the configuration interface,
set the desired temperature for the comfortable mode
symbolized with a sun and press confirm, then select
the desired temperature for the energy saving mode
symbolized with a moon and press confirm again.
Note: even in automatic mode, the energy saving mode
is established when you press the key until the next
temperature change established in the programming.
These modes are used in automatic or manual mode but
are not available in holiday mode.
3. Boiler stoped mode
In summer, when the boiler is stopped, it is
recommended to put the valve in Boiler stoped mode to
avoid calcification.
In manual mode, turn the rotary selector increasing the
temperature until "ON" appears on the display.
4. Anti-freeze function
If it is not necessary to provide heating to the room, you
can enter stop and antifreeze mode.
In this mode, the valve remains closed, unless the room
temperature approaches 0 ºC, in which case, the valve
will open automatically to prevent freezing and will close
again when the room reaches 5ºC.
To enter this mode, turn the rotary selector
54
