Idiomas disponibles
Idiomas disponibles
1. All routine maintenance and maintenance work must be carried out after the vacuum
cleaner is turned off.
2. Clean up dust in the dust cup regularly to avoid the failure of the vacuum cleaner.
3. The surface of the vacuum cleaner can not be scrubbed with gasoline or oil, the
application of soft cloth or neutral detergent scrub, scrub when the wipe cloth must be
wrung dry, do not infiltrate the water into the electrical components of the vacuum
cleaner.
4. Keep the storage site dry.
5. Heavy objects should not be piled up above the machine.
In the following general problems, users can check:
Note: When the following problems are found, please Immediately turn off
damage to the machine and causing other hazards
Problem
Unable to boot
The product makes
an abnormal sound
Dust is blown out
in use
The vaccum
cleaner is not
charged
Daily maintenance and storage of products
Troubles Shooting
Possible cause
The battery has no electricity
The vaccum cleaner swith is not
turned on
Internal parts of the vaccum
cleaner are damaged
Dust is full, or filtered too dirty
Battery power drops
Broken filter device in the dust
bucket
Filter components forget to install
The power adapter is not power
plugged in
The power adapter charging plug
is not inserted into the machine
charging hole
Power adapter is damaged
Internal parts of the vacuum
cleaner rare damaged
Solution
Recharge
Push the switch slide to the on state
Remove the dust bucket and
remove the garbage or blockage
Clean dust bucket and clean filter
(cleaned filter should not be installed
in the product until thoroughly dry to
avoid damage to motor )
Continue to use after recharging
Stop the use immediately and
replace a new filter
Stop immediately and install the
filter assembly in place
Insert the power adapter again
into the power supply
The power adapter charging plug
is inserted into the charging hole
of the machine
Replace the power adapter
Replace the vacuum cleaner
20
