Idiomas disponibles
Idiomas disponibles
Bracket base use instruction
1. Attach the bracket base to the wall following the
direction of the arrow at the appropriate height.
2. Once the base is installed, the crevice tool and combo
crevice tool could be attached.
3. Holding the handle of the machine in you hand, place
the floor brush on the floor and drag the machine to
the bracket. The battery pack should face the bracket,
check that the bracket is not loose, assemble the
complete machine as shown in the figure to the right
and the installation is complete. If you need to use the
vacuum cleaner, hold the handle straight up and pull
the machine out in the opposite direction.
3
1
2
19
