Troubleshooting; Environmental Information - Philips AZ 1565/01 Manual De Instrucciones

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

If a fault occurs, first check the points listed below before taking the set for repair.

If you are unable to remedy a problem by following these hints, consult your dealer or service centre.

WARNING:

Do not open the set as there is a risk of electric shock. Under no

circumstances should you try to repair the set yourself, as this will

invalidate the guarantee.

PROBLEM

– POSSIBLE CAUSE

• REMEDY

No sound/power

– VOLUME not adjusted

• Adjust the VOLUME

– Headphones connected

• Disconnect headphones

– Mains lead not securely connected

• Connect AC mains lead properly

Severe radio hum or noise

– Electrical interference: set too close to TV,

VCR or computer

• Increase the distance

Poor radio reception

– Weak radio signal

• FM: Direct the FM telescopic aerial for

optimum reception

indication

– CD badly scratched or dirty

• Replace/ clean CD, see Maintenance

– Laser lens steamed up,

• Wait until lens has cleared

indication

– CD-R(W) is blank or the disc is not finalised

• Use a finalised CD-R(W)

Environmental information

All unnecessary packaging material has been omitted. We have done our utmost to make the

packaging easy to separate into three mono-materials: cardboard (box), expandable polystyrene

(buffer), polyethylene (bags, protective foam).

Your set consists of materials which can be recycled if disassembled by a specialized

company. Please observe the local regulations regarding the disposal of packing

materials, exhausted batteries and old equipment.