6. START UP INSTRUCTIONS
6. START UP INSTRUCTIONS
6.1. UNPACKING AND LIST OF MATERIALS
This machine includes the following items that you will
find inside the box:
• Blow tube
• Machine.
• Tube holding screw
• Manual.
Carefully remove all items from the box and make
sure that all listed items are present. Carefully inspect
the product to ensure that there are no damaged
elements.
If you find any damaged or missing parts, do not
use the machine until the defect has been repaired
or all the missing pieces replaced. Using the machine
without all of its parts or with defective parts can
cause severe personal injury.
6.2. ASSEMBLY
6.2.1. ASSEMBLY BLOWER
Squeeze the top tab and insert the tube all the way.
Screw in the screw from the opposite side.
6.3. START UP
ATTENTION: The machine does not work if not
fully mounted.
6.3.1. CHECKING POINTS PRIOR TO USING THE
MACHINE
The current and tension supplied must coincide with
those in the characteristics label. Prior to starting
work check that the machine works adequately and all
security measures work.
Do not use the machine if it is damaged or not well
regulated.
Use this machine to do jobs for which it has
been designed. Any other use could be dangerous to
the end user, for the machine and to other people,
animals and things that are nearby.
Check that the machine is correctly mounted with
both tubes and the catcher.
Verify that:
- The machine completely and look for loose parts
(screws, nuts, etc.) and damages.
- Press, repair or replace everything you need before
using the machine
6.3.2. FIXING CABLE EXTENSION
Only use cable extensions that are homologated for
outdoor use.
The cable section must be at least 1.5mm and the
cable extension should never be longer than 25m and
must be completely unrolled before starting to work.
Fix the cable by inserting it on the hook provided to
this effect at the back of the machine.
29/112
English