Specifications
Model
Bandwidth (3 dB)*
Attenuation
Resistance at probe tip
(±2% at DC)
Capacitance at probe tip
Scope input impedance
Scope x10 pin
Maximum working voltage
Compensation range
Cable length with probe and BNC
Temperature Storage
Temperature Operating
Max. humidity (non-condensing)
Storage
Max. humidity (non-condensing)
Operating
Max. altitude Storage
Max. altitude Operating
Pollution degree
Weight (probe without holder)
Probe tip diameter
RoHS and REACH compliant
*
Only CATII 300V RMS with finger protection mounted on probe
The probes can continue to measure above the rated bandwidth but with
decreased signal, the probe will reach the f3dB limit above the rated
bandwidth.
SQ200
DC to 200 MHz
DC to 350 MHz
13,9 pF
300 V RMS CAT II*
1,2m (approx. 3 ft 11 in)
–40 °C to +60 °C
–20 °C to +50 °C
80 % to +30 °C, decreasing linearly to 40 % at +50 °C
2 (As defined in IEC 61010-031. Only non-conductive
pollution. Occasionally, however, a temporary
conductivity caused by condensation must be
40
SQ350
SQ500
DC to 500 MHz
10:1
10 MΩ
12,7 pF
1 MΩ
Yes
9 to 54 pF
80 %
15 km
2 km
accepted.)
40 g
0.5 mm
Yes
9 pF
