Idiomas disponibles
Idiomas disponibles
NOTE:
- The total declared vibration value and the declared noise emission value have been
measured according to the standard test method used in the industry and can be used for
comparisons between tools.
- The total declared vibration value and the declared noise emission value can also be
used for a preliminary exposure assessment.
WARNING:
- The vibrations that occur during actual use of the tool may differ from the total declared
value, depending on the manner in which the tool is used.
- Take measures to avoid the risks associated with vibration. For example: keep tools
and accessories in good condition, wear gloves when working, limit operating time and
reduce actuation time.
ENVIRONMENTAL INFORMATION
When the machine needs to be replaced after many years of use, do not throw it away with
household rubbish; dispose of it in an environmentally-friendly manner. Waste electrical products
should not be disposed of with the rest of the household rubbish. Please recycle them if you have
access to such a service. Consult the relevant authority or distributor for more information about
recycling.
CAUTION! This product has been marked with a symbol referring to the disposal of electrical
and electronic waste. This means that this product should not be disposed of with the rest
of the household waste, but through a collection system that complies with the European
WEEE Directive. Ask the distributor or relevant local authority for information on recycling. The
product will then be recycled or dismantled in order to reduce the impact on the environment.
Electrical and electronic equipment can be harmful to the environment and human health, as
they contain hazardous substances.
CLEANING AND MAINTENANCE
• This tool does not require any special maintenance. Clean the ventilation slots regularly. Do
not allow liquids to enter the interior of the tool. Do not use household chemicals to clean the tool
(e.g. turpentine, paint thinners).
(and always replace both brushes at the same time).
• If the power cable is damaged, it must be replaced by the manufacturer, its service agent or a
17
