Idiomas disponibles
Idiomas disponibles
DIRECTIONS FOR USE
Insert the plug into a power outlet and always check that the voltage of the power supply
corresponds to the voltage shown on the rating plate (Rated voltage: 230V-240V, 50HZ).
1 Installation of the transparent protective cover
Transparent protective cover
Important: wear safety glasses.
2 How to change the saw blade
Saw blade release:
Turn the screws counter-clockwise.
Insert the saw blade as far as it will go into the groove and tighten the two retaining clip screws.
Note: It is not necessary to completely loosen the two screws to mount or remove the
saw blade. Loosening the screws completely can cause less space between the screw
head and the protector, which can impede the movement of the hex wrench when
tightening the two screws.
Important! Make sure that the saw blade is properly seated in the groove of the roller
and the recess.
3 Switching on and off
Turn on: press the trigger switch.
Continuous operation: lock the trigger switch with the lock button.
Turn off: press the trigger and then release it.
15
