RealFlame 906LP Morrison Manual De Instrucciones página 12

ASSEMBLY INSTRUCTIONS
5
Place lava rock by hand. DO NOT dump bag out into tray to avoid
clogging the burner with dust. Position the lava rock (11 lbs, 5kgs) to a
level about 1" above the top of the burner. Make sure that you do not
blockthe igniter housing with lava rock to ensure proper ignition.
Note: Lava rock pieces are 1"- 2.5" (3~6 cm)
Glass pieces are 0.75"- 1.75" (2~4.5 cm).
Igniter Housing
Lava Rock and Glass Filler Warning:
1. Do not overfill the burner area with rock or glass filler. The filler should cover a maximum
of 1" above the burner tube. Only Real Flame filler products have been certified for use with
this Real Flame fire table.
2. Do not light or use this fire table if filler is wet. Ensure filler is completely dry before lighting.
Intense heat can cause wet filler to explode and hit someone causing injury.
3. Please keep away from the fire table for at least 20 minutes during initial start-up as filler
could retain some moisture from manufacturing and shipping.
12