Idiomas disponibles
Idiomas disponibles
1.3
Distinguishing feature
The simatherm IH 045 is the world's first induction heating device to con-
nect to a mobile phone via Bluetooth. This guarantees the user fast, intuitive
operation with direct communication via the app for support, updates or the
advantages of digital operator guidance. With the help of the app, heating
data can also be recorded and visualised for quality assurance purposes.
The two-probe technology enables stress-free heating for pre-lubricated,
sealed and precision rolling bearings. The temperature difference between
the bearing inner and outer ring can be adjusted and monitored.
The external induction coil leads to higher efficiency at lower power con-
sumption, which reduces the costs for heating the bearings.
2
Description
The operation of the heater is controlled by the internal electronics in either
of the two modes. The operator can either select the desired temperature of
the bearing in TEMP MODE or set the length of time that the bearing will be
heated in TIME MODE. For the slow heating of sensitive components (such
as bearings with C1 or C2 spacing), the power level can be adjusted in
steps of 10%. In two-probe mode, the temperature difference between the
inner and outer ring can be adjusted. The following applies: The smaller the
temperature difference, the lower the mechanical stress that occurs in the
bearing, which in turn significantly increases the bearing service life.
2.1
Components
3
2
5
1
7
28
4
1. User interface
2. Temperature probe
3. Yoke
4. Coil
5. U-Core
6
6. Extendable bearing support
7. Main switch
Induction Heater IH 045
© simatec ag
