Idiomas disponibles
Idiomas disponibles
English
The bolt of lightning in an equilateral
triangle warns the user that the device
has high voltage that could result in a
risk of electric shock.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near
water.
6. Clean only with dry cloth.
7. Do not block any ventilation
openings. Install in accordance
with the manufacturer's
instructions.
8. Do not install near any heat
sources such as radiators,
heat registers, stoves, or other
apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety
purpose of the polarized plug
(common). A polarized plug has
two blades with one wider than
the other. The wide bladed is
provided for your safety. If the
provided plug does not fit into
your outlet, consult an electrician
for replacement of the obsolete
outlet.
10. Protect the power cord from
being walked on or pinched
particularly at plugs, convenience
receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/
accessories specified by the
manufacturer.
12. Use only with the cart, stand,
tripod, bracket, or table specified
by the manufacturer, or sold with
the apparatus. When a cart is
used, use caution when moving
the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during
lightning storms or when unused
for long periods of time.
14. Refer all servicing to qualified
service personnel. Servicing is
required when the apparatus has
been damaged in any way, such
as power-supply cord or plug is
damaged, liquid has been spilled
or objects have fallen into the
apparatus, the apparatus has been
exposed to rain or moisture, does
not operate normally, or has been
dropped.
15. Only connect this product to
the type of mains electrical supply
indicated on the device. If you
are unsure what type of mains
electrical supply is required for
the product or your electrical
installation, ask your installer
or your electricity supplier. For
devices intended for use with a
battery or another power source,
see the user manual.
16. This product is a Class 1
appliance. Only plug in the device
using the mains plug provided,
which incorporates an earth
connection. The device must be
plugged into an earthed mains
socket.
WARNING: To prevent any risk of
electric shock, do not remove the cover
(or the back) from the device. There are
no user-serviceable parts in this device.
For maintenance or repairs, contact a
qualified professional.
17. Where the mains plug or
an appliance coupler is used
as the disconnect device, the
disconnect device shall remain
readily operable. To disconnect
the equipment from the mains
remove the mains plug from the
mains outlet.
18. Do not overload wall sockets,
extension leads or multiple socket
outlets. This could cause fire or
electric shock. Make sure that the
maximum permissible power of
each component of the installation
is not exceeded.
19. WARNING: To reduce the risk
of fire or electric shock, do not
expose this device to water, rain
or moisture. In addition, the device
must not be exposed to dripping
or splashing liquid and no objects
filled with liquids, such as vases,
should be placed on the device.
20. Do not insert any objects into
the device's ventilation openings.
They could come into contact
with one of the high-voltage
components or short-circuit them
and cause a fire or electric shock.
21. When using the device, the
ambient temperature should not
exceed 95°F (35 degrees Celsius).
22. Do not use this device in
tropical climates.
23. Do not use this device at
altitudes of more than 2,000 m
(6,500 ft).
24. If the device has been
transported from a cold
environment to a warm
environment, make sure no
condensation has accumulated
before connecting the power
cable.
25. Always leave a distance of at
least 5cm (2") around the product
for proper ventilation.
26. Do not place naked flame
sources, such as lit candles, near
the device.
27. The appliance should only be
mounted on a wall or ceiling if the
manufacturer allows for this.
28. This product has sharp
corners. Handle it with care.
29. Do not attempt to repair
this device yourself. Opening
the device may be dangerous.
Contact a qualified professional
for all work on the device.
30. When replacement
components are needed, use only
the components specified by the
manufacturer or components
with identical technical features
to those of the original product.
Using non-compliant components
could cause fires, electric shocks
or other risks.
IMPORTANT SAFETY INSTRUCTIONS!
Warning symbol. This symbol is designed
to warn the user of the presence of
important instructions mentioned in the
user manual and relating to the handling,
operation and maintenance of the device.
31. After any maintenance or repair
work on the device, test it to check
that it is working safely.
32. Turn the source to minimum
before connecting the products
and turning up the volume. Once
the products are in place, gradually
increase the volume to a reasonable
and comfortable level.
33. To avoid damaging your hearing,
do not listen to loudspeakers at
high volumes for long periods of
time. Listening to loudspeakers
at an excessive volume can cause
damage to the user's ears and
may lead to hearing problems
(temporary or permanent deafness,
buzzing in the ears, tinnitus,
hyperacusis). Exposing your ears
to a volume higher than 85dB
SPL-LAeq for several hours can
irreversibly damage your hearing.
34. After removing the product
from its packaging, keep the
packaging out of the reach
of children. It could present a
suffocation risk.
35. Some users who are not
self-sufficient enough to use the
product on their own without
danger. In particular, children under
14 or people with some types of
disabilities must be supervised and/
or accompanied when using the
device.
USA : Federal Communication
Commission Interference Statement
This device complies with Part 15 of
the FCC Rules. Operation is subject
to the following two conditions: (1)
This device may not cause harmful
interference, and (2) this device
must accept any interference
received, including interference that
may cause undesired operation.
This equipment has been tested and
found to comply with the limits for
a Class B digital device, pursuant
to Part 15 of the FCC Rules. These
limits are designed to provide
reasonable protection against
harmful interference in a residential
installation. However, there is no
guarantee that interference will not
occur in a particular installation.
Canada : Industry Canada Statement
This device complies with ISED's
licence-exempt RSSs. Operation
is subject to the following two
conditions: (1) This device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause
undesired operation.
