Retighten A Loose Chuck; Clean The Machine; Technical Data; Limited Warranty - GreenWorks CD24B00 Manual Del Operador

NOTE
Note: before remove the chuck, lock the switch trigger
by placing the direction of rotation selector in center
position and remove the battery pack.
• Lossen the chuck jaws securely and insert a cross
screwdriver into the chuck of the drill to remove the
screw in a clockwise direction.
• The chuck body can now be unscrewed by hand in
a counterclockwise direction.
8.2

RETIGHTEN A LOOSE CHUCK

• Aline the chuck hole to the drill spindle and tighten
the chuck in a clockwise direction until the chuck
engages completely with a continuous click. At this
time, the chuck jaw is closed.
• Use a dexterous strength to loosen the chuck jaw
counterclockwise. Aline the screw with the hole of
spindle and insert a screwdriver into the chuck to
tighten the crew counterclockwise.
8.3

CLEAN THE MACHINE

CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
• Clean the housing and the plastic components with
a moist and soft cloth.
9

TECHNICAL DATA

Rated Voltage
No Load Speed
Chuck
Clutch
Weight without battery
Battery model
Charger model
English
24 V
0-450 / 0-1750 / min.
(RPM)
1/2 ( 13mm ) Keyless
24 Positions + Drill
3.3 lbs ( 1.50 kg )
BAM706
CAM803
10

LIMITED WARRANTY

YEAR/ANS/AÑOS
TOOL WARRANTY
GARANTIE DE
L'OUTIL
HERRAMIENTA
®
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. Greenworks
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-833-493-5483.
TRANSPORTATION CHARGES:
Transportation charges for the movement of any power
equipment unit or attachment are the responsibility of
the purchaser. It is the purchaser's responsibility to pay
transportation charges for any part submitted for
replacement under this warranty unless such return is
requested in writing by Greenworks
9
®
, at its own discretion will
®
.
EN