Idiomas disponibles
Idiomas disponibles
Temperature
Press "+"/ "-" to set the temperature what you want (22°C—35°C). when arrive the setting temperature,
the pet incubator will stop heating until the current temperature lower the the setting.
Note:
Press "-" to switch the temp. to display "- -" and then the pet incubator will enter the ventilation mode
(no heating).
The pet incubator will into the ventilation mode (Temperature shows "- -") automatically when turned
on. Long pressing "+" & "-" for 5 seconds, the temperature will display the current environment temperature,
and then back to "--" after 5 seconds.
Humidity
Display the actual environment humidity.
Light
Touch the button to turn on/off the light.
F°=C°
In heating mode, long press
for 5s to switch from F° to C° or from C° to F°.
07
www.turbro.com
